BlueStars 3392519 Dryer Thermal Fuse 2-Pack
4.7Editor score
Two 3392519 thermal fuses
196°F single-blow cutoff
Broad major-brand compatibility
Basic-tool installation
Lifetime protection stated
In this guide
Thermal fuses are small but essential safety components in many gas dryers, interrupting the heating circuit when temperatures become excessive. A dependable replacement must fit the appliance, use the correct temperature rating, and address the cause of overheating rather than simply restoring power. This guide explains the differences among ten replacement options.
The products below were compared using the information supplied by their manufacturers and sellers, including supported part numbers, stated brand compatibility, installation characteristics, ratings, pack quantity, and whether the package contains a fuse alone or a broader thermostat kit. The list includes dedicated 3392519 fuses, multi-packs, a distinct 3390719 model, and several repair combinations.
The selections show why matching the original part number matters, why airflow problems should be corrected before installation, and when a complete thermostat kit may be more useful than a single fuse. The 3392519 is the most common fit among the listed products, while the 3390719 is a separate option. Product listings and availability may change, so confirm the dryer model and current listing before ordering.
Top 3 Picks for Best Thermal Fuses for Gas Dryer
3 Pack WP3392519 Thermal Fuse
4.8Editor score
Three replacement thermal fuses
196°F one-time blow mechanism
Extensive cross-reference numbers
Metal and ABS plastic construction
Straightforward rear-panel replacement
BlueStars Four-Piece Dryer Thermal Kit
4.6Editor score
Four essential heat-control parts
Cycling thermostat included
High-limit thermostat included
Thermal cut-off component included
Multiple replacement numbers listed
Top 10 Best Thermal Fuses for Gas Dryer in 2026 Compared
This side-by-side comparison organizes all ten options by package contents, core part number, stated compatibility, and practical repair scope. It makes clear which products are single-fuse replacements, which provide useful spares, and which include the thermostats commonly inspected alongside a blown thermal fuse.
ProductsSpecificationsEditor scorePrice
Best Budget
BlueStars 3392519 2-Pack
Two 3392519 thermal fuses
196°F single-blow rating
Major brands supported
Lifetime protection stated
4.7Editor score
Editor's Choice
BlueStars Four-Piece Thermal Kit
Four heat-control components
Includes 3392519 thermal fuse
Cycling thermostat included
High-limit thermostat included
4.6Editor score
Best Premium
BlueStars 3392519 Single Fuse
Single 3392519 thermal fuse
196°F single-blow rating
Extensive part-number cross-references
Lifetime protection stated
4.7Editor score
WP3392519 Thermal Fuse 3-Pack
Three WP3392519 fuses
Direct-fit replacement design
Multiple brand cross-references
Airflow cleaning emphasized
4.7Editor score
BlueStars 3392519 3-Pack
Three 3392519 thermal fuses
196°F single-blow rating
Wide major-brand compatibility
Basic-tool installation
4.6Editor score
Four-Piece Thermal Safety Kit
Four heat-control components
Includes 3392519 fuse
GRS certification stated
OEM-standard materials claimed
4.6Editor score
WP3392519 Universal 3-Pack
Three WP3392519 fuses
196°F one-time mechanism
Metal and ABS construction
OEM-standard testing claimed
4.8Editor score
Cycling Thermostat and Fuse Kit
Four heat-control components
Includes WP3392519 fuse
Broad named-brand support
Non-resettable fuse noted
4.6Editor score
3392519 Universal Thermal Fuse 2-Pack
Two 3392519 thermal fuses
Two 3/16-inch terminals
Non-resettable safety design
Wide brand compatibility
4.7Editor score
BlueStars 3390719 Thermal Fuse 2-Pack
Two 3390719 thermal fuses
Distinct OEM part number
Listed model compatibility
Lifetime protection stated
4.7Editor score
1. BlueStars 3392519 2-Pack – Best Overall Thermal Fuses for Gas Dryer
BlueStars 3392519 2-Pack
Two 3392519 thermal fuses
196°F single-blow rating
White plastic housing
Two-inch wire length
The BlueStars 2-Pack 3392519 is a practical first choice for a gas dryer that needs its primary thermal fuse replaced. It carries a 4.7 rating and offers two complete 3392519 units. Each is described as a white plastic safety mechanism measuring two by one-half inches, using heat-sensitive metal and a 196°F single-blow, non-resettable limiter.
Pros
- Two replacements included
- Extensive compatibility list
- Clear 196°F rating
- Simple installation guidance
- Lifetime protection stated
Cons
- Not a complete thermostat kit
- Requires separate airflow troubleshooting
We may earn a commission when you buy through this link, at no additional cost to you.
Its strongest quality is the unusually extensive reference list. The listing connects the fuse with Whirlpool, Kenmore, KitchenAid, Roper, Estate, Inglis, Maytag, Crosley, Amana, Admiral, and Magic Chef dryers. Common replacement numbers include WP3392519, AP6008325, G4AP0500, 3388651, 694511, 80005, PS11741460, and WP3392519VP, making model-number verification especially important before purchase.
The two-pack configuration provides more flexibility than a single replacement without expanding into a full thermostat set. Its limitations are straightforward: it does not include the cycling thermostat, high-limit thermostat, or separate cut-off component found in broader kits, and a new fuse will not solve a restricted vent. The listing also describes the part as non-resettable, so it must be replaced again if it has opened.
This is a strong recommendation for a homeowner or maintenance technician who has confirmed the original part is 3392519 and wants a spare available. The installation advice is appropriately basic, but electrical and gas isolation should come before opening the appliance. Once airflow has been checked and the replacement is installed correctly, this pack offers dependable coverage and convenient redundancy.
A useful two-fuse replacement strategy
Keeping a second matched fuse on hand is helpful because thermal fuses are one-time safety devices. It also allows a technician to install a fresh unit if the first replacement shows signs of damage during inspection, although the fuse should not be bypassed or substituted without confirming compatibility.
Compatibility comes down to identification
The long list of supported brands is helpful, but the part number must still match. Locate the old fuse, compare its shape and markings, and confirm that the dryer model is covered before ordering. Brand name alone is not enough because closely related dryers can use different heat-control assemblies.
We may earn a commission when you buy through this link, at no additional cost to you.
2. BlueStars Four-Piece Thermal Kit – Best Complete Heat-Control Upgrade
BlueStars Four-Piece Thermal Kit
Four heat-control components
Includes 3392519 fuse
Includes 3387134 thermostat
Includes two safety thermostats
The BlueStars 3387134 Cycling Thermostat and 3392519 Thermal Fuse kit is the most complete option in this roundup, with a 4.6 rating. Its package contains the 3387134 cycling thermostat, the 3392519 thermal fuse, the 3977767 high-limit thermostat, and the 3977393 thermal cut-off kit. That selection covers several distinct functions within a typical gas-dryer heat-control circuit.
Pros
- Comprehensive heat-control coverage
- Cycling thermostat included
- Extensive replacement number lists
- OEM-standard materials claimed
- Lifetime protection stated
Cons
- More parts than a focused repair
- Compatibility requires careful matching
We may earn a commission when you buy through this link, at no additional cost to you.
The kit is particularly useful when a dryer has no heat, runs too hot, takes too long, shuts down early, will not start, or has a timer that does not advance. Because a thermostat controls when the cycle begins and ends, while a high-limit device responds to excessive temperature, replacing only a fuse can leave another aging component in place. The broader package allows the whole heat-control group to be inspected together.
This breadth is also the main trade-off. If the diagnostic process has clearly identified only a failed 3392519 fuse, replacing additional parts without evidence may be unnecessary. The listing provides extensive cross-references, but those numbers cover different devices and should not be treated as interchangeable. The user must still match the dryer model and original component dimensions before installation.
For a technician or a homeowner dealing with multiple heat-control symptoms, this is the most versatile selection in the guide. It offers the thermal fuse needed to restore the safety cutoff and the thermostats commonly associated with uneven heating or premature shutdown. Choose it when the entire assembly shows wear or when replacing the components together will reduce repeated diagnostic work.
One package, several heat-control functions
A gas dryer uses multiple controls to coordinate heating, airflow, and safe shutdown. This package covers the four components highlighted in the listing, allowing the technician to replace the suspect fuse while also renewing the cycling and high-limit controls that regulate the broader cycle.
Best for multi-symptom troubleshooting
The kit is most persuasive when the dryer presents several linked complaints, such as insufficient heat, excessive drying time, early shutdown, and a timer that does not advance. It is less necessary when testing has positively isolated a single open fuse and every surrounding component is demonstrably operational.
We may earn a commission when you buy through this link, at no additional cost to you.
3. BlueStars 3392519 Single Fuse – Best Focused Single-Part Replacement
BlueStars 3392519 Single Fuse
Single 3392519 thermal fuse
196°F single-blow rating
Heat-sensitive fuse material
White plastic enclosure
The BlueStars 3392519 Single Fuse is a direct, uncluttered replacement for dryers that use the familiar WP3392519-style thermal cutoff. It has a 4.7 rating and shares the same stated 196°F single-blow, non-resettable design found in the two-pack option. It is intended to stop electrical flow to the motor circuit when the dryer overheats.
Pros
- Highly focused replacement
- Well-known 3392519 format
- Broad cross-reference coverage
- Straightforward DIY instructions
- Lifetime protection stated
Cons
- No spare fuse included
- Thermostats are not included
We may earn a commission when you buy through this link, at no additional cost to you.
The product description emphasizes straightforward installation. It instructs users to unplug the dryer, open the appliance, remove the existing fuse, mark the wire positions, connect the replacement one wire at a time, secure the mounting screws, and verify the connections before testing the heat cycle. That sequence is useful because it reduces the chance of reversed or loose terminals.
As a single-fuse listing, the main limitation is obvious: there is no backup unit and no thermostat. That makes it most appropriate for a confirmed 3392519 replacement when the rest of the heat-control system has already been checked. The installer must also investigate blocked airflow, lint accumulation, vent damage, blower problems, and other conditions that can cause the original fuse to open.
This option is a strong choice for a precise repair because it supplies exactly the component identified by the diagnostic process. Its 4.7 rating, detailed part-number references, and clear 196°F specification make it easier to compare with the factory component. Confirm the model and original part number, isolate power and gas properly, and avoid testing the dryer until the wiring and airflow have been checked.
Ideal when only the fuse failed
A single-part purchase keeps the repair focused and avoids replacing functioning thermostats. It is a sensible choice when the open fuse is visibly intact, the wiring is undamaged, the blower moves freely, and the exhaust path is clear. Diagnosis matters more than convenience when deciding whether to replace only this component.
A precise temperature specification
The stated 196°F single-blow behavior identifies the intended protection threshold and confirms that the component is a one-time device. Matching the original rating is essential; a fuse with an inappropriate temperature response could open too soon or remain conductive when it should interrupt the circuit.
We may earn a commission when you buy through this link, at no additional cost to you.
4. WP3392519 Thermal Fuse 3-Pack – Best Spare-Focused Three-Pack
WP3392519 Thermal Fuse 3-Pack
Three WP3392519 thermal fuses
Direct-fit component design
Cross-brand part references
Slide-on terminal design
The WP3392519 Thermal Fuse 3-Pack carries a 4.7 rating and is designed for dryers requiring the WP3392519-style component. It includes three replacement fuses, making it attractive to property managers, landlords, repair professionals, or homeowners who want spare protection components available. The listing identifies Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Jenn-Air, and Amana as supported brands.
Pros
- Three units for spares
- Direct-fit replacement format
- Useful cross-reference numbers
- Clear airflow warning
- Broad named-brand coverage
Cons
- No thermostats included
- Replacement alone may not solve overheating
We may earn a commission when you buy through this link, at no additional cost to you.
A major strength is its direct emphasis on the underlying reason thermal fuses fail. The product guidance recommends cleaning the rear lint-trap area and exterior exhaust ducts during installation, correctly noting that restricted airflow can make a new fuse open again. The slide-on terminals are also described in a way that helps installers recognize their intended orientation, although the appliance wiring diagram and original connector should remain authoritative.
The package does not include a cycling thermostat, high-limit thermostat, or complete cut-off kit, so it is not intended to refresh the whole heat-control assembly. Nor does installing a fresh fuse resolve a damaged wire, a seized blower, a faulty timer, or a blocked vent. Its three-piece format provides inventory value, but unused fuses do not diagnose the source of an overheat event.
This is a good pick for a technician who has established that the 3392519 format is correct and wants several replacements on hand. It is also suitable for maintenance operations responsible for multiple compatible units. The final installation should always include electrical and gas isolation, physical inspection of the wiring, and a full airflow cleaning before the dryer is returned to service.
Useful inventory for repeated repairs
Three matching units are convenient for service kits and ongoing maintenance. They are especially useful for technicians who service several compatible dryers, although each installation still requires an individual diagnosis and airflow inspection. A spare should never be used to avoid finding the cause of an open fuse.
Airflow correction prevents repeat failures
The installation guidance highlights a principle that applies to every replacement in this guide: a thermal fuse is a protective endpoint, not the cause of overheating. Cleaning the lint path and checking the exterior vent can prevent a correctly installed fuse from opening again and protects the heating and blower systems as well.
We may earn a commission when you buy through this link, at no additional cost to you.
5. BlueStars 3392519 3-Pack – Best Balanced Three-Fuse Replacement Set
BlueStars 3392519 3-Pack
Three 3392519 thermal fuses
196°F single-blow rating
Metal and plastic construction
Major-brand compatibility
The BlueStars 3392519 3-Pack provides three thermal fuses in a configuration that balances replacement availability with focused repair. Its 4.6 rating reflects generally favorable customer feedback, while the product description identifies the familiar 196°F single-blow limiter and construction from metal and plastic.
Pros
- Three matching replacements
- Clear 196°F rating
- Broad supported brand list
- Useful installation instructions
- Lifetime protection stated
Cons
- No thermostats included
- Exact model verification required
We may earn a commission when you buy through this link, at no additional cost to you.
The compatibility claims cover Whirlpool, Kenmore, KitchenAid, Roper, Estate, Inglis, Maytag, Crosley, Amana, Admiral, and Magic Chef. Numerous part numbers are accepted as replacements, including 3388651, WP3392519, 694511, 80005, WP3392519VP, PS11741460, AP6008325, G4AP0500, 39800, and 21900. That breadth is useful during identification, though buyers should still compare the original component and dryer model.
Compared with the single-fuse listing, this three-pack adds useful inventory without the complexity of a full thermostat kit. The trade-off is that it still cannot address a failed cycling thermostat or high-limit thermostat, and it provides no evidence that the underlying airflow problem has been corrected. It is best suited to a known 3392519 application or a maintenance stock that serves matching appliances.
For a homeowner replacing a confirmed component, the extra units can be valuable if one is damaged during installation or if another compatible dryer later needs the same part. For a technician, the set reduces repeated purchasing. Installation should follow the supplied sequence, with the dryer disconnected from both electrical and gas supplies, wiring photographed, terminals connected one at a time, and the heat cycle tested only after airflow has been restored.
Convenient stock without thermostat complexity
This package focuses entirely on the thermal fuse, which makes it easier to match a known replacement task. It provides redundancy without introducing cycling and high-limit thermostats that may not be needed. That focused scope is the central reason to consider it instead of a multi-part repair kit.
Confirm the cutoff and terminals
The 196°F rating and standard 3392519 references are positive identifiers, but visual and dimensional comparison remains important. Check the wire length, terminal arrangement, mounting style, and original marking before purchase. A compatible part number should align with all of those physical characteristics.
We may earn a commission when you buy through this link, at no additional cost to you.
6. Four-Piece Thermal Safety Kit – Best Certified Multi-Part Repair Set
Four-Piece Thermal Safety Kit
Four heat-control components
Includes 3392519 thermal fuse
GRS certification stated
Metal and plastic materials
The Four-Piece Thermal Safety Kit is a broad repair package with a 4.6 rating. It includes the 3387134 cycling thermostat, 3977767 high-limit thermostat, 3977393 cut-off component, and 3392519 thermal fuse. The listing positions the set for common Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Crosley, Estate, Amana, and Admiral dryer families.
Pros
- Four related heat-control parts
- Cycling thermostat included
- GRS certification stated
- Wide brand compatibility
- Replacement support offered
Cons
- Larger repair than a single fuse
- Multiple numbers require verification
We may earn a commission when you buy through this link, at no additional cost to you.
GRS certification is a product-specific feature that distinguishes this option from many conventional replacement lists. The set also includes the thermal fuse and the thermostats that govern cycle timing and excessive-temperature response. This combination can be efficient for a dryer showing several heat-control symptoms or for an older appliance whose related safety components are due for renewal.
The disadvantages come from breadth. A comprehensive kit requires the installer to identify which components the machine actually uses, and several similar part numbers in the cross-reference list can create confusion. A repair should not be based on a brand label or a visually similar housing. The original wiring, shape, mounting method, and manufacturer diagram should determine the correct component.
This kit is a good option for a technician comfortable with gas-appliance heat-control systems and able to test each component in context. It is less attractive for a first-time DIY user who has already confirmed that only a simple 3392519 fuse failed. Its certified construction and complete selection nevertheless make it a strong choice when several heat-control parts need attention simultaneously.
Certification adds a distinct selling point
The stated GRS certification gives buyers an additional product-specific standard to consider alongside compatibility and construction. Certification does not remove the need to match the original part, but it can help distinguish this kit from generic listings that provide few technical details. Review the certification and fit information together rather than treating either as a substitute for model verification.
Replace related controls as a group
When a thermal fuse has opened and nearby thermostats are also old, renewing the group can restore more consistent heat regulation. The approach is especially relevant for machines with long drying times, early shutdown, or inconsistent temperature control. If only one component has failed and the others test correctly, a focused fuse replacement remains the cleaner repair.
We may earn a commission when you buy through this link, at no additional cost to you.
7. WP3392519 Universal 3-Pack – Best Rated Three-Pick Fuse Option
WP3392519 Universal 3-Pack
Three WP3392519 thermal fuses
196°F one-time mechanism
Metal and ABS plastic build
Extensive number cross-references
The WP3392519 Universal 3-Pack is the highest-rated option in this guide at 4.8. It contains three white thermal fuses described as replacements for the WP3392519 family, with compatibility references including AP6008325, G4AP0500, 388651, WP3392519, 694511, 80005, WP3392519VP, PS11741460, 39800, and 21900.
Pros
- Highest listed rating
- Three matching replacements
- Detailed compatibility references
- Clear 196°F mechanism
- Simple rear-panel installation
Cons
- Does not include thermostats
- Universal wording needs verification
We may earn a commission when you buy through this link, at no additional cost to you.
Its technical description is clear about the operating principle. Each fuse uses heat-sensitive metal and ABS plastic in a precise 196°F, or 91°C, one-time blow mechanism. That means the component is designed to interrupt power when the specified excessive-heat condition occurs and is not intended to reset. The listing also says the parts were tested to OEM standards, though that manufacturer statement is not the same as independent product testing.
The package is appealing for its combination of a strong supplied rating, three matching units, and detailed references. However, the word universal in the product title should not override the need to verify fit. The manufacturer names cited include Whirlpool, Kenmore, Maytag, KitchenAid, Amana, and Admiral, but model-level confirmation remains necessary. It also includes no thermostats, so it cannot address a broader heat-control failure by itself.
This is the strongest general pick for a known 3392519-style application because it offers the highest rating, useful inventory, and one of the clearest technical descriptions. The installation steps are sensible: unplug the dryer, open the rear panel, identify the old fuse, mark the wiring, replace connections one at a time, and test after reassembly. Add a complete airflow check to avoid another premature failure.
Highest-rated option among the picks
A 4.8 rating is the strongest numerical result in the supplied product data, making this three-pack a persuasive choice when two similar dedicated fuse sets are being compared. Ratings reflect customer experience rather than an independently performed laboratory test, so compatibility and construction details still deserve careful review.
Three spares for matching equipment
The package is useful for a single repair, a small maintenance inventory, or several compatible dryers. Keeping identical fuses available also reduces the temptation to use a near-match when a later failure occurs. Each replacement should still be installed only after confirming the original specification and correcting airflow restrictions.
We may earn a commission when you buy through this link, at no additional cost to you.
8. Cycling Thermostat and Fuse Kit – Best Comprehensive Thermostat Package
Cycling Thermostat and Fuse Kit
Four heat-control components
Includes WP3392519 fuse
Includes cycling thermostat
Includes high-limit thermostat
The Cycling Thermostat and Fuse Kit has a 4.6 rating and includes four heat-control components: the WP3387134 cycling thermostat, WP3392519 thermal fuse, 3977393 cut-off fuse, and WP3977767 high-limit thermostat. The package is aimed at Whirlpool, Kenmore, Maytag, Roper, Estate, Inglis, KitchenAid, Crosley, Amana, Admiral, and Magic Chef dryers.
Pros
- Four core heat-control parts
- Detailed replacement numbers
- Broad named-brand compatibility
- Non-resettable behavior explained
- OEM-standard materials claimed
Cons
- Requires broader diagnostic judgment
- Multiple parts add installation work
We may earn a commission when you buy through this link, at no additional cost to you.
Its detailed replacement-number listing helps users navigate the many identifiers associated with appliance parts. It also clearly notes that the thermal fuse is disposable and must be replaced after opening, while the thermostats are commonly investigated when a dryer has no heat, insufficient heat, excessive drying time, early shutdown, no start, excessive heat, or a timer that does not advance.
Because the kit includes several controls, it is best suited to a repair where multiple heat-related symptoms point to a broader assembly problem. If only one open fuse is present and the remaining components function normally, replacing everything is more labor-intensive and may be unnecessary. The installer should use the original wiring diagram and identify each control by location, not simply by a shared cross-reference number.
The product is a solid choice for a technician performing a comprehensive heat-control rebuild. Its metal and plastic construction is described as meeting OEM standards after inspection, while the broad compatibility list gives users a useful starting point. A competent installer should still isolate both electricity and gas, label every connection, and verify that the blower and exhaust are unobstructed before testing.
A full thermostat rebuild option
The package combines the temperature-regulating thermostat with thermal cutoff and high-limit protection. That combination is valuable when multiple symptoms suggest the heat-control section has aged or when the dryer has already experienced repeated overheating events. It can reduce the need for several separate component orders.
Diagnostic skill matters more
A multi-part kit assumes that the installer can distinguish the cycling thermostat, fuse, and high-limit thermostat. Their functions and failure modes differ, so replacing them without understanding their role can leave the underlying issue untouched. A wiring diagram, visual inspection, and appropriate electrical testing remain essential.
We may earn a commission when you buy through this link, at no additional cost to you.
9. 3392519 Universal Thermal Fuse 2-Pack – Best Compact Two-Fuse Replacement
3392519 Universal Thermal Fuse 2-Pack
Two 3392519 thermal fuses
Two 3/16-inch terminals
Non-resettable safety function
Blower-housing installation location
The 3392519 Universal Thermal Fuse 2-Pack has a 4.7 rating and offers a compact two-piece solution for several major gas-dryer brands. It supports Maytag, Whirlpool, Kenmore, Crosley, Amana, Admiral, Estate, and Roper models, along with numerous replacement references including 3388651, WP3392519VP, 80005, 694511, G4AP0500, PS11741460, AP6008325, and EAP11741460.
Pros
- Two complete replacement units
- Clear terminal measurements
- Identifies fuse location
- Wide brand compatibility
- High-strength terminals claimed
Cons
- Thermostats are not included
- Non-resettable operation requires replacement
We may earn a commission when you buy through this link, at no additional cost to you.
One useful detail is the stated location of the fuse next to the blower fan on the blower housing. Knowing where to look can make identification faster, especially when the dryer does not heat or shuts down unexpectedly. The two 3/16-inch wire terminals are another concrete identification point, allowing buyers to compare the replacement with the removed component.
The product is limited to the primary fuse and does not include any thermostat. It therefore does not resolve a cycling-temperature failure, an open high-limit thermostat, or an electrical issue outside the fuse. Because the fuse is non-resettable, an opened unit cannot be restored and must be discarded. Its high-strength terminal claim is reassuring, but the wires and connectors should still be inspected for heat damage during service.
This is a well-targeted choice for a dryer already confirmed to use the 3392519 format. The two-pack provides a backup without the complexity of a full kit, and its location and terminal details make identification more practical. Before fitting it, check the lint screen, blower housing, internal ductwork, and exterior vent; then disconnect power and gas, replace the component carefully, and test the heat cycle only after everything is reassembled.
Useful physical identification details
The stated three-sixteenth-inch terminals and blower-housing position help distinguish the part during a repair. These measurable clues are often more reliable than a brand label alone. Compare the original fuse, wire lengths, mounting arrangement, and markings before ordering or connecting the replacement.
Treat the fuse as a warning
The open fuse tells you the dryer exceeded its safe operating condition. Replacing it without checking airflow can expose the new fuse, wiring, thermostat, and heater to the same conditions. Cleaning the lint path and verifying that the blower and vent operate properly are integral to a lasting repair.
We may earn a commission when you buy through this link, at no additional cost to you.
10. BlueStars 3390719 Thermal Fuse 2-Pack – Best Distinct-Part-Number Alternative
BlueStars 3390719 Thermal Fuse 2-Pack
Two 3390719 thermal fuses
Separate OEM-style number
Whirlpool and Kenmore support
Multiple model references
The BlueStars 3390719 Thermal Fuse 2-Pack is an important alternative because 3390719 is a different part from 3392519. It holds a 4.7 rating and is described as compatible with Kenmore, Whirlpool, and KitchenAid dryers, including listed models such as 106.97502820, 10686294140, 10686294340, 11062882101, and 11062882100.
Pros
- Correct option for 3390719
- Two replacement units
- Detailed model compatibility list
- High-quality material claimed
- Lifetime protection stated
Cons
- Does not replace 3392519 models
- Thermostats are not included
We may earn a commission when you buy through this link, at no additional cost to you.
Its replacement references include AP6008309, 279650, 3389639, 3389640, WP3390719, 660877, 688841, 690198, 690798, 80004, WP3390719VP, PS11741444, AH344958, EA344958, ET402, and AP3133489. These identifiers make it possible to distinguish the component from the more prevalent 3392519 fuse found throughout the rest of this roundup.
The two-pack is focused and does not include thermostats. It is therefore appropriate only when the original fuse is identified as the 3390719 format. A 3392519 should not be selected merely because both are small thermal fuses; wire length, terminal arrangement, mounting position, and circuit requirements must align. A mismatch could produce an improper fit or incorrect protection behavior.
This option deserves a place in the guide because compatibility errors often begin with overlooking a less common OEM number. It is a good selection for a specific dryer whose original component is marked 3390719, while the 3392519 products remain the better choices for the many dryers using that widely recognized design. Confirm the model and part marking, inspect the wiring, and correct any airflow restriction before installing the replacement.
Not interchangeable with 3392519
The most important point is the different part number. Buyers accustomed to seeing 3392519 may overlook 3390719, while owners of a 3390719 appliance may incorrectly choose one of the more common replacements. Always compare the number printed on the original component and the appliance model before purchase.
Model-specific matching adds confidence
The listing provides several example model numbers, which is useful for preliminary verification. The dryer model should still be checked against the manufacturer's parts information, especially where a family of similar models uses different thermal components. Physical comparison provides another layer of confirmation.
We may earn a commission when you buy through this link, at no additional cost to you.
Buying Guide – How to Choose the Best Thermal Fuses for Gas Dryer
Choosing the correct thermal fuse requires matching the original electrical and physical design, while broader kits can help when several heat-control components need renewal. The most important decisions are part-number accuracy, thermal rating, dryer layout, and whether the underlying overheating condition has been corrected.
Match the original part number
In short, never assume that every Whirlpool, Kenmore, Maytag, or Crosley dryer uses the same fuse.
Confirm temperature and reset behavior
Choose a replacement with the same temperature rating and one-time cutoff behavior specified for the original component.
Compare terminals, wire length, and mounting
Match the connector arrangement and mounting method, not merely the fuse shape or color.
Choose the right package scope
Pick a single fuse for a confirmed isolated failure, a multi-pack for spares, and a full kit for multi-symptom heat-control work.
Account for dryer model support
Use the exact model number and the original part marking together; both should support the replacement.
Understand the repair-kit contents
Understand each part's function before buying a kit, and never interchange a cycling thermostat with a safety cutoff.
Prepare for safe installation
Isolate electricity and gas, label every wire, and never bypass the thermal cutoff to test the dryer.
Resolve airflow and overheating causes
Clean and inspect the entire airflow path before testing, because restricted ventilation is a common cause of repeat fuse failures.
How to Use and Care for Your Thermal Fuses for Gas Dryer
Start by confirming the diagnosis and the part. Unplug the dryer and shut off its gas supply before opening any panel. Locate the thermal fuse, usually near the blower housing, and compare its part number, terminals, wire length, and mounting style with the replacement. If the original is marked 3390719, do not force a 3392519-style substitute into the assembly. Consult the dryer diagram and model-specific parts information before proceeding.
Take a clear photograph of the wiring and label each connector before removing the old fuse. Disconnect the terminals one at a time, inspect the wires for discoloration, brittleness, melting, or heat damage, and install the new fuse with the same orientation and secure connection. Replace heat-damaged wiring or connectors with the proper service-approved parts rather than simply reconnecting compromised conductors.
Before testing, clean the lint screen and housing, inspect the internal airflow path, clear the exterior vent, and confirm that the blower rotates freely. Reassemble all panels, restore the gas and electrical connections, and run a monitored heat cycle. If the new fuse opens again, stop using the dryer and investigate airflow, blower operation, thermostat function, and the heater circuit rather than installing another fuse.
Frequently Asked Questions
Are thermal fuses for gas dryers the same as high-limit thermostats?
No. A thermal fuse is a one-time safety cutoff that opens when excessive heat is detected, while a high-limit thermostat is a resettable or cycling control that interrupts the heating circuit under elevated temperatures. Some multi-part kits include both because the components serve different functions and may fail around the same time. A thermal fuse should never be used to replace a high-limit thermostat.
Is a 3390719 thermal fuse interchangeable with a 3392519?
They are different part numbers and should not be assumed to be interchangeable. The 3390719 option in this guide is intended for compatible Whirlpool, Kenmore, and KitchenAid models that use that specific component. Confirm the marking on the original fuse, the model number, terminal arrangement, and wire length before selecting either part.
Why does a new dryer thermal fuse keep blowing?
A replacement fuse usually opens again because the dryer is still overheating. Restricted airflow, a clogged lint screen, blocked exterior vent, dirty or seized blower, incorrect wiring, or a malfunctioning thermostat can all create excessive heat. Stop using the dryer until the airflow path and heat-control components have been inspected; repeatedly replacing the fuse without diagnosis may damage the heater or create a safety hazard.
Can I install a dryer thermal fuse myself?
A basic fuse replacement can be approachable for someone comfortable with appliance repair, but gas dryers require care around both electrical and fuel connections. Disconnect the dryer from the outlet and gas supply, follow the wiring diagram, label every connector, and never bypass the fuse. If gas connections, wiring tests, or diagnostic uncertainty are concerns, use a qualified appliance technician.
Does a gas dryer thermal fuse control the burner directly?
The thermal fuse is a protective cutoff within the dryer's heat-control circuit, not a valve that directly controls gas flow. It responds to dangerous heat conditions and prevents continued operation when it opens. Normal burner operation is coordinated by other controls, such as the timer, cycling thermostat, and high-limit system.
How many thermal fuses should I buy?
One is sufficient for a single confirmed repair, while a two- or three-pack provides a spare for future use. A multi-pack is useful for maintenance inventories, landlords, or technicians servicing several compatible dryers. Ensure every replacement in the pack has the correct part number and rating for the appliance; having extra matching fuses does not make a different fuse model suitable.
What is the difference between a 3392519 and WP3392519?
WP3392519 is a commonly used manufacturer or retailer prefix associated with the 3392519 thermal fuse design. The listings in this guide treat it among the compatible cross-reference numbers for the 3392519 component. When ordering, compare the complete model and part information rather than assuming every prefix represents an identical item, and verify physical fit.
Should I replace the thermostats when replacing a thermal fuse?
Not automatically. Replace the surrounding thermostats when testing shows they are defective, when the dryer has several heat-control symptoms, or when an older assembly is being renewed comprehensively. If the cycling thermostat, high-limit thermostat, wiring, blower, and airflow path are all sound, a single correctly matched fuse may be the appropriate repair. A complete kit can be convenient, but it should reflect the actual repair need.
Final Thoughts on Choosing the Best Thermal Fuses for Gas Dryer
The BlueStars 3392519 2-Pack stands out as a balanced overall recommendation, combining a 4.7 rating, two replacement units, a stated 196°F rating, and broad compatibility references. The WP3392519 Universal 3-Pack earns the top rating at 4.8 and provides three matching replacements, while the BlueStars four-piece kit is the most complete option for addressing several heat-control components at once.
Prioritize exact part-number and physical compatibility over generic brand claims. Most dryers represented in this guide use the 3392519 family, but the 3390719 option serves a distinct application and should be selected only when the original component confirms it. Also decide between a focused fuse, a spare-equipped multi-pack, and a thermostat kit based on the symptoms and test results rather than on package size alone.
Finally, remember that a new fuse is only one part of a safe and lasting repair. Disconnect the dryer from power and gas, inspect the wiring, clear the entire airflow path, and verify the blower and heat-control system. Product listings and availability can change, so review the current details and confirm the dryer model before ordering.